Guide to Fixing Leaking Shingles in an Old Roof [Gillum]
Wiki Article
While replacing leaking, worn-out shingles is a significant job, homeowners with basic knowledge and the right equipment are capable of doing it. These are just a few tips to get you started.
The first step in removing worn-out roofing shingles is to clean them off. It is possible to get rid of the worn-out shingles using a crowbar, or a pressure washer. To prevent injury from flying particles, you should wear gloves and goggles.
After removing the old roof shingles, check for damage. If there are problems, you will need to address roof contractor Cooksville Illinois them first.
You are now ready to apply the new shingles that you have prepared. Begin at the base and work your ways up, nailing down the shingles as you go. You must ensure (blog) that the nails are evenly spaced and driven in with enough force.
Fourth, as you get to the peak of the roof, construct a drip edge to keep water from seeping beneath the tiles you just installed.
Five, after you're done, be sure to seal all the edges and joints of your roof with a thick coat of sealant to keep the elements out.
If they follow the information given, most homeowners will be able replace old, leaking shingles on their roofs. Please take all essential steps to safeguard your safety, and work slowly to get the best results.